ITECH2301 Network Architecture and Design - Assignment Help

Assignment Help on Network Architecture

Assessment Objective

  • This assignment provides an opportunity to understand the techniques and protocols used in the layers of TCP/IP network (Internet) model
  • Learning Outcomes Assessed:
    • K3 - Explain the technologies and protocols of physical, data link, network and transport
    • S1- Analyse data communication and networking technologies in today's
    • A2 - Analyse data communication and networking technologies in today's

Requirements

  1. 1 illustrates how a message is transmitted from the application layer to the physical layer in the Internet model of a data communication network.
  2. With the aid of the diagrams of header formats, explain the main purpose of all fields of the header formats of the transport, network, and data link layers protocols. For example, the main purpose of the source address and destination address of an IP Header is to provide the sender and receiver IP addresses,

[12+12=24 marks]

  1. Use your web browser to connect to one of the following websites whose number in the number list is equal to the 4th digit of your student ID. Let your student ID be 32684567. Since the 4th digit of your student ID is 8, you need to select https://www.um.edu.my/ (8th item) of the following list:
  2. https://www.unsw.edu.au/
  3. https://www.unisa.edu.au/
  4. https://www.harvard.edu/
  5. https://www.u-tokyo.ac.jp/
  6. https://en.whu.edu.cn/
  7. http://www.iitkgp.ac.in/
  8. https://www.ait.ac.th/
  9. https://www.ntu.edu.sg/
  10. https://www.um.edu.my/
  11. https://www.microsoft.com/en-au/

We’ll write customized paper for you.
Get Upto 30% OFF on your Order!

Using the Wireshark protocol analyser, capture all packets generated in response to your request for the above web page. For a selected pair of the first HTTP request‐response lines, write the hex/decimal values of all fields of the header formats of the transport, network and data link layers protocols whatever available in your file captured by Wireshark.

[12+12=24 marks] Note, HTTP request packet and response packet are identified by the following ways:

HTTP Request - GET / HTTP/1.1 HTTP Response- HTTP/1.1 200 OK

However, if you use Wi-Fi (WLAN) and are not in monitor mode, Wireshark does not show HTTP protocols (https://osqa-ask.wireshark.org/questions/37704/wireshark-not-showing- http-protocols). Note, monitor mode is not supported by WinPcap, and thus not by Wireshark or TShark, on Windows (https://wiki.wireshark.org/CaptureSetup/WLAN). In this case, any sorts of packets, such as from the client to the server (e.g., Client Hello) and from the server to the client (Server Hello) will be accepted as request packet and response packets, respectively.

  1. Capture IPv6 packets through Wireshark protocol analyser. Using the packets captured by Wireshark, contrast and compare the IPv4 packet header format with that for the IPv6 packet header format.

[10 marks]

  • The application Layer uses the HTTP protocol
  • The transport layer uses the TCP (Transmission Control) Protocol
  • The network layer uses The IP (Internet) Protocol
  • The data link layer of the LANs typically uses the Ethernet protocol
  • Protocol Data Units

(PDUs)

Fig. 1: Message transmission through layers.

  1. Signaling (Encoding) and Modulation Techniques
  • Draw how the bit pattern 10 0 1 1 0 1 1 would be sent using
    1. Unipolar signalling [2 marks]
    2. Return to zero (RZ) signalling [2 marks]
    3. Non return to zero (NRZ) signalling [2 marks]
    4. Manchester encoding [5 marks]
    5. Amplitude Modulation (AM) [2 marks]
    6. Frequency Modulation (FM) [2 marks]
    7. Phase Modulation (PM) [5 marks]

[Total 20 marks]

N.B. You can draw the bit pattern on papers and insert them as pictures into your document.

  • Which of the above mentioned signaling (encoding) techniques [refer to 2.1 (a)-(d)] you think is the best? Please justify your answers with some supporting

[2+6=8 marks]

  • Describe the factors (metrics) that are used to assess the performance of the above mentioned signaling (encoding) techniques [refer to 2.1 (a)-(d)]. Write the pros and cons of Manchester encoding against Non return to zero (NRZ)

[5+5=10 marks]

  1. Answer the following question on media access control:
  2. List two examples of controlled access and contention-based media access protocols and their application areas. [2+2=4 marks]

Our Academic Assistance: service is all about doing research and being good at it. The more research one will do, the better the paper will turn out.

Expert's Answer

Your future, our responsibilty submit your task on time.

Order Now

Need Urgent Academic Assistance?

Get Professional Help at Low Prices!

*
*
*


*

TOP
Order Notification

[variable_1] from [variable_2] has just ordered [variable_3] Assignment [amount] minutes ago.