Typical projects supervised by staff members
| Staff Member | Project title |
|
Prof Khac Duc Do |
Anti-locking brake control for cars |
| Control of Ocean Drilling Risers | |
| Simulation and feedback control of a Marine Riser | |
|
Prof Michele John |
Challenges in the Recycling of Solar PV and Wind Energy Technology Equipment - An Engineering Perspective |
| Engineering challenges facing the use of native seed in broadacre land restoration | |
| Prof Tele Tan | Feasibility study of applying deep learning for corrosion classification in the Collins class submarines |
|
Prof Tilak Chandratilleke |
Application of phase change material for the improvement of LED cooling systems |
| Condensation on porous insulation and its effect on thermal conductivity | |
| Designing and development of an atmospheric moisture extractor using thermo-electricity | |
| Effectiveness of Thermal Radiation Shield in Regulating Solar Heat Gain | |
| Experimental Determination of Thermal Conductivity of Granular Materials | |
| Implementation and validation of melting and solidification of phase change material through the computational Lattice Boltzmann method | |
| The Development of a Thermal Flowmeter | |
| Thermal characterisation and parametric evaluation of melting ice sheet |
|
A/Prof Chunsheng Lu |
An optimal probability estimator for the strength distribution of alumina |
| Modelling and predicting tearing paths in paper sheets | |
| Statistical analysis on the strength distribution of alumina | |
|
A/Prof Ian Davies |
Current biomedical applications of porous hydroxyapatite-based biomaterials: A review |
| Evaluation of fastener load loss over time in a conventional flanged joint assembly | |
| Finite element analysis investigation on the stiffness of porous materials - truncated octahedron | |
| Finite Element Analysis of the Flexural Strength of Hybrid Composite Laminates | |
| Investigating the single fibre fragmentation test in polymer composite | |
| Investigating interfacial delamination in a multi-layer coated system for hydrogen storage application | |
| Literature review of Recent Advances in Bone Tissue Engineering and Polymer/Ceramic Composite Scaffolds | |
| Porous carbon-carbon composites and carbon foams: A literature review | |
| Recent Developments of Composites for Lightning Strike Protection - A Literature Review | |
| Analysis of hot bolting conditions using MorSafe™ clamp | |
| Autonomous Release Systems for Baited Remote Underwater Video Systems | |
| Computer simulation of bimodal sphere packings with large radius ratios | |
| Design and Manufacture of Deep-water Camera Housings for use Within the Field of Fish Ecology | |
| Factors Affecting the Dimensional Accuracy of Additive Manufacturing Processes | |
| Finite element analysis investigation on the stiffness of porous materials- rhombic dodecahedron | |
| Finite Element Analysis of Stress Distribution for a Silicon Carbide and Alumina Coated Steel Vessel Subject to Thermal Loading | |
| Literature Review of 3D Printing and its Applications in Medicine | |
| The Development and Design of a Baited Remotely Operated Underwater Vehicle for the Analysis of Fish Variety and Abundance | |
| The Flexural Properties of Fibrous Hybrid Composites in a Polymer Matrix: A Review |
|
A/Prof Michele Rosano |
Engineering review of air pollution of world-Delhi, India & decoupling economic growth. What lessons can be learnt from other nations and possible solutions? |
| Marine Plastic Waste and Engineering Solutions in South East Asian Developing Countries | |
| Threshold concepts in sustainable engineering education | |
|
A/Prof Pawel Podsiadlo |
Development of conceptual designs for cyclic loading and heating in ASTM G65 test rig |
| Fatigue analysis of spur gears with pitting | |
| Fatigue analysis of Z-Spool with misalignment, weld and crack | |
| Fatigue Life of Spur Gears With Tooth Pitting | |
| Prediction of Height Stacking of Steel Pipes | |
| Simulating dry sliding wear with finite element method | |
| Effects of coatings on wear in dry sliding contacts | |
| Prediction of thermally induced seizure in bearings with texturing | |
|
A/Prof Ramesh Narayanaswamy |
An Experimental Investigation on the Effects of Personal Comfort Systems on Thermal Comfort |
| An investigation of the performance of a single pass direct contact membrane distillation system in tandem with a photovoltaic thermal collector | |
| Analysis of droplet growth on a cylindrical surface with horizontal and vertical orientations under controlled humidity | |
| Drop shape analysis for droplet condensation in fog harvesting | |
| Dropwise condensation experiments with relative humidity control | |
| Effect of Temperature on Contact Angle and Contact Angle Measurement Technique for Evaporating Droplet | |
| Experimental Study of Dropwise Condensation Heat Transfer on a Vertical Surface | |
| Heat Transfer Analysis on Phase Change Materials in a Rectangular Enclosure with/without Fin | |
| Mathematical modelling of dropwise condensation underneath a horizontal surface | |
| Technologies for waste heat recovery in building energy conservation | |
| Thermal Energy Storage for Energy Storage Applications in Buildings | |
| Experimental investigation of phase change material (PCM) melting in a partitioned enclosure with side wall heating | |
| Numerical Simulation of Dropwise Condensation on a Horizontal Surface |
| A/Prof Wahidul Biswas | Improving the Uptake of Electrified Vehicles in Western Australia |
|
Dr Alokesh Pramanik |
A Literature Review on Conventional and Unconventional Drilling of Titanium Alloys |
| Analysis of spot weld development and spot weld failures in DP600 weld joints | |
| Application of 3D Printing in the Biomedical Industry | |
| Burr Minimization and Hole Quality In Drilling Aluminium alloy Al6061-T6 | |
| Cooling Effect During Machining | |
| Developments of Non-Conventional Drilling Methods | |
| Drilling of CFRP | |
| Effect of machining on tensile behaviour | |
| Effects of Electric Discharge Machining and Tensile Testing of Stainless Steel 304 | |
| Problems and Solutions for Burr Formation | |
| The effects of Wire-EDM on Inconel 718 | |
| Wire EDM of Nickel Alloy | |
| A new method to reduce delamination during drilling CFRPs | |
| Effectiveness of coolants during drilling of Inconel 718 at different speeds | |
| Effectiveness of minimum quantity lubrication and liquid nitrogen cooling methods in turning Inconel 718. | |
| The testing of machinability and hole quality of the drilling of Inconel 718 with solid carbide drills under cryogenic, minimum quantity lubrication and compressed air cutting conditions |
|
Dr Chris Ford |
Accessibility for a handcycle operated by a person with limited lower body mobility |
| Analysis and Redesign of a Handcycle Chassis | |
| Design of a Final Drive Package for use on a Formula SAE Vehicle with a CVT | |
| Design of a Lightweight Braking System for a World Solar Challenge Car | |
| Development of a standardised framework to evaluate materials for seating panels of wheelchair donations to less resourced countries | |
| Experimental analysis of chain line configuration on a recumbent handcycle prototype | |
| Feasibility and Design of a Turbocharged Powertrain for Continuously Variable Transmissions in Formula SAE | |
| Investigation of compliance within a vehicle's suspension system with applications to Formula SAE | |
| Investigation of steering and suspension design of a three-wheel handcycle | |
| Limitations of ISO standards in wheelchair caster design | |
| Validation of an FSAE transient vehicle model | |
| Design of a cooling system for a Genesis 80FI powered FSAE vehicle | |
| Design of a Formula Student Electric Car Drivetrain | |
| Exhaust optimisation for acoustics and performance in an F-SAE vehicle | |
| Modelling and analysis of mode separated suspension | |
|
Dr Ilyas Mazhar |
Condition monitoring data analysis in condition based maintenance |
| Data analysis techniques for condition-based maintenance | |
| Predicting Remaining Useful Life of a Machine Using Artificial Neural Networks and Multiple Linear Regression | |
| Effects of Axial load & Raceway Curvature on ball bearings deformations in Slew bearings | |
| Investigation on effects of involute spur gear parameter on contact and bending stresses using finite element analysis |
|
Dr Jonathan Dong |
Conceptual Design for a 3D printed Conveyor Pulley |
| Element type selection for finite element analysis in engineering design | |
| Flexural behaviour of carbon and glass fibre reinforced functionally graded hybrid composites | |
| Micromechanical Modelling for Thermal Conductivity of Composites | |
| Modelling flexural behaviour of sandwich composites | |
| Numerical Study on Effects of Voids in Composite Materials | |
| Prctical Fatigue Assessment of Rotating Conveyor Pulleys by FEA | |
| Modelling of Delamination in Composites | |
| Modelling of Flexural Properties of Natural Fibre Hybrid Composites | |
|
Dr Julien Cisonni |
A Computational Fluid Dynamic Analysis and Parametric Study of the Curtin Motorsport Team's 2018 Undertray |
| Adaptation of the span-wise profile of a wing behind a bluff body | |
| Aerodynamic analysis of a Kammtail Virtual Foil (Computational Fluid Dynamics) | |
| Biomimetic Propulsion Using a heaving Rigid or Flexible plate | |
| Biomimetic Propulsion Using a Pitching Flexible Plate | |
| Computational fluid dynamics analysis and parametric study of surfboard fins with a sinusoidal leading edge. | |
| Computational Fluid Dynamics Analysis of a 3D Printed Pintle Injector | |
| Drop impact on thin films | |
| Fluid Structure Interaction of a cantilever 2D wing | |
| Influence of an upstream bluff body on the performance of a wing | |
| RANS Simulation of Passive Drag Reduction Devices for Quad Trailer Road Train | |
| Surface Waves of a Liquid Thin Film induced by an Air Turbulent Boundary Layer | |
| The use of CFD in Swimming |
|
Dr Kristoffer McKee |
Continued development of a low-cost solar cooking solution incorporating Phase Change Materials for displaced and emergency contexts. |
| Fault diagnostics utilising long term dependencies developed with temporal convolutions | |
| Finite Element Analysis Model of a Vibrating Screen | |
| Finite element analysis of mast-hull interface of a hydrofoil. | |
| Machine learning as a tool to predict ground reaction force by means of inertial sensors during jumping tasks in ballet dancers | |
| Machine Learning for Resource Sector Effort Estimation and Optimisation | |
| Mechanical Design of a Bearing Test Rig for Condition Monitoring | |
| RDAQ with BLE and Energy Harvesting Battery | |
| The design of a low cost solar-powered water pump | |
| An investigation into the use of a hot-compost as a potential heat source for a bio-digester system in a complex environment (like a refugee camp) | |
| Bearing fault classification and severity analysis based on support vector machine and linear regression | |
| Using a piezoelectric device to trigger a handheld data acquisition system on a Raspberry Pi | |
| Vibrating screen modal analysis | |
|
Dr Lei Cui |
The Manufacture, Testing, and Redesign of a Cam Driven Exoskeleton |
| Augmented reality technology for neurosurgery using Microsoft HoloLens | |
| Design and development of a passive clutch-spring leg orthosis system | |
| Robotic Hand Exoskeleton - Automating exoskeleton design using SolidWorks API | |
|
Dr Marcin Wolski |
Analysis of Radiographic Osteoarthritis in Knee Joints using Engineering Standards |
| Analysis of bone texture in hands |
|
Dr Masood Khan |
Affective state recognition using thermal imaging techniques |
| Automated Detection of Intruders for Wildlife Protection | |
| Deep learning on graphs for texture classification of common thorax diseases | |
| Design of a Robotic Eye Multiloop Mechanism | |
| Facial expression recognition with convolution neural network models | |
| Real Time Pavement Crack Detection | |
| Weed classification using convolutional neural network | |
|
Dr Nima Nadim |
Experimental Investigation of Mist Jet Impingement and cooling and parametric analysis |
| Moisture Accumulation and its Influence on the Thermal Conductivity of Pipe Insulation | |
| Natural convection induced flow through an inclined narrow passage | |
| PIV and Thermal Measurements of a Rayleigh-Bénard Cell | |
| Shape Optimisation of Vertical Endplates for Ekranoplan Ground Effect Craft | |
|
Dr Roger Dong |
A review on biodegradable plastics and composites for food packaging applications |
| Design And Optimisation of 3D Printed Tissue Scaffolds | |
| Fabrication and characterisation of biocomposite films | |
| Stress analysis of 3D printed PLA / carbon fibre composites | |
| The Review of Waste Car Tyres for Potential Applications in Composite Materials |
|
Dr Tomasz Woloszynski |
Development of a simple and portable bioreactor system for the testing and conditioning of tissue-engineered vascular grafts |
| Effects of lubricant starvation on the performance of journal bearings | |
| Hydraulic Rockbreaker performance optimisation and system design techniques | |
| Surface texturing of elastohydrodynamically lubricated contacts | |
| The application of Digital Twins for improving the management of large complex assets | |
| Transient analysis of cavitation at the piston ring-cylinder liner interface | |
| Effects of cavitation on squeeze films in crankshaft bearings | |
| Effects of lubricant rheology on the behaviour of elastohydrodynamic traction drives | |
| Effects of Roughness on the Behaviour of EHL Line Contacts | |
| Effects of surface texturing on the performance of elastohydrodynamic traction drives | |
| Modelling hydrodynamic lubrication using cellular automaton | |
| Dr Zakaria Quadir | An investigation on the effect of different greases on the static friction impediment in Ni-Al-Bronze valves in marine environments |
Our Academic Assistance: service is all about doing research and being good at it. The more research one will do, the better the paper will turn out.
Expert's Answer
Chat with our Experts
Want to contact us directly? No Problem. We are always here for you
Your future, our responsibilty submit your task on time.
Order Now
Get Online
Assignment Help Services
