Table of Contents
TAFE Plumbing Course
Being a student of the TAFE plumbing course and tackling both studies and multiple assignments at the same time can be a little hectic but our assignment help service is just a click away to take the load off you. Our professional and expert writers will write assignments on any topic related to plumbing according to your requirements. So if you are overwhelmed because of this issue then feel free to contact us.
What is TAFE?
TAFE, or Technical and Further Education is a government-funded institution that provides vocational training in various range of courses and qualifications that are designed for everyone from dropouts to someone who wants a change in their career. TAFE aims to equip students with necessary and practical skills to help enhance job prospects and boost earning potential.
The variety of courses and their duration, which range from a few hours for refresher courses to two or three years for associate diploma and diploma courses, is one of the major differences between TAFE and higher education institutions. TAFE also offers a wide range of credentials, which includes certificates, diplomas, advanced diplomas etc. so if you acquired practical skills, it is highly recommended to study at TAFE.
Three best TAFE in Australia
There are over 84 TAFE in Australia operating over 300 campuses. Three of the best ones are mentioned below.
TAFE New South Wales ( TAFE NSW)
TAFE NSW is the largest vocational and training college in Australia and the world as well. With having more than a hundred years of experience in education training under its belt, it is no doubt one of the best institutions to get your training from. TAFE NSW offers programs/courses in over 250 academic fields. The credential provided by this TAFE included: Advanced diplomas, Certifications, Associate degrees, etc.
TAFE Queensland (TAFE QLD)
TAFE QLD is the largest and the most experienced vocational and training education college in Queensland, Australia. At more than 50 locations in Queensland, it offers students practical, industry-relevant courses and training with a range of credentials from diplomas to bachelors. Through its courses, students will get the opportunity to learn and develop valuable skills that will help them get in touch with relevant industries in Australia.
TAFE SA – Vocational Education & Training in Adelaide
TAFE SA is located in the city centre of Adelaide, it is the largest training and vocational education college in South Australia. TAFE SA adopts a small class teaching model so that each student can get the best education and help from their respective teachers. It offers a range of courses from the certificate to the postgraduate diploma in various academic fields.
Plumbing and Water Operations Courses
Plumbing Apprenticeships and Traineeships
The list of courses and apprenticeships provided above are from TAFE SA.
TAFE Plumbing Courses
Plumbing courses from TAFE are nationally recognized which ensures that students develop knowledge and skills that are in demand and sought after. With the help of both practical and theoretical knowledge. TAFE Plumbing courses offer different kinds of licenses for Plumbing and fitting gas. Plumbers can work in commercial, retail and residential sites upon the completion of the courses.
Why Consider Studying Plumbing?
There are various reasons why a career in Plumbing could be a great choice. Some of them are as follows.
Various Job Opportunities.
Being a plumber doesn’t always mean fixing toilets, drainage or doing house calls. You will be surprised to see how many other career options you have. Your future career will be based on what you are interested in and what kind of skills you have. These are some of the career opportunities for a plumbing major.
- Drainage
- Fire protection
- Gas fitting (plumber and gasfitter)
- Irrigation (non-agricultural)
- Mechanical service
- Roofing (storm water)
- Sanitary
- Water supply
Earning Potential
According to PayScale, the average pay scale of an apprentice plumber in Australia is between $23000 to $55000. And the average salary of a qualified and certified plumber is up to $85000.
Job Stability
Plumbing is a high in demand career, as there will always be a need for experienced and qualified plumbers. So if you are in search of a stable career you don’t have to look any further. In addition to this, it is a rewarding job in the sense that you are working with your hands, moving to different sites and solving complex problems.
TAFE Plumbing Courses: What Do You Learn In It?
As it was mentioned Plumbing courses offers you a license for plumbing and gas fitting, plumbers work on different sites and projects. The main skills and knowledge you get about, include hot and cold water delivery, gas pipes, hot water tank installation, underfloor and plumbing drainage system, roofing, and storm water installation.
Plumbing can be broken into two major fields:
- Plumbing Science
- Plumbing Material Science
Plumbing Science
Let’s get deeper into the art and science of Plumbing. Everything included in it is essential to get the right results, from understanding how waters move around pipes, water quality, water impact on how well soap works and also how water goes through the drain. For all this to happen a lot of science and engineering happen.
Science Concept about Plumbing That You Should Know
Gravity
Gravity is the invisible force that pulls two objects toward each other. Gravity is what keeps you on the ground and what makes things fall. Everything that has mass has weight, so in this case, the weight of the water helps in draining.
Density
Density is the mass divided by volume. The thicker the substance is the harder it will be to move it. The density of water when it is hot and when it is cold is different so it is important to check it as well.
Pressure
It is one of the most essential aspects that a plumber needs to know. If the pressure of the water is not right there could be some problems such as if the water pressure level is high the pipe could burst, if it is low then water can’t flow through pipes. Water pressure is created because of the weight of the water, which take us back to gravity. Everything is directly or indirectly connected.
Chemistry
Another important thing that the plumber needs to know about is the chemistry of water, which is made up of two atoms hydrogen and oxygen. Water has an excellent ability to absorb other substances in it. However, when we are talking of hard water the case is different, soap is less or sometimes completely ineffective in hard water and it also creates blockages in the pipes.
Corrosion
Corrosion is one of the major issues faced by plumbers all over the world. Rusting of the pipe is dependent on the chemistry of the water. If the level of acid and alkaline is higher it could damage your pipes quickly.
Plumbing Material Science
It breaks into further two fields.
- Plumbing standards
- Properties of Plumbing Material
Plumbing Standards
Standards are a set of rules and requirements for the design, construction, installation, maintenance of plumbing and drainage installation. Various standards are given so that it can reduce the complications that occur in terms of instruments and their maintenance.
Properties of Plumbing Material
The physical, chemical, and mechanical components of a product that define its functionality and manufacturability are referred to as material properties.
Hardness
It is defined as a material’s ability to resist permanent deformation. The term includes deformation from indentation, scratching, cutting or bending. Normally the harder the material is, the better resistance it has to deformation.
Strength
The ability of a material to resist an applied load without failure or plastic deformation is its strength. The field of strength of materials deals with forces and deformations that result from their acting on a material.
Elasticity and Deformation
Elasticity is when a force is applied to a material and it temporarily loses its original shape. But, it returns to its original state after the force is removed. The stress applied to a material that leads to its deformation is called strain. If there is a continuation application of stress on the material and it is deformed to the point that it loses its ability to return to its original form then permanent deformation is said to occur.
Contact Us For Assignment Help
We hope this blog was informative! Also if you are looking to get help for your Tafe Plumbing assignments feel free to contact our expert writers to get all the help you would possibly need.
